ACX Ready / Room tone
ACX room tone: how much at the start and end
"We recommend between 1 and 5 seconds of room tone at the beginning and end of each file for an ideal listening experience."
ACX, ACX audio submission requirements
Room tone is the quiet sound of your recording space with nobody speaking. ACX wants a short stretch of it at the start and end of every file, so chapters don't start abruptly or cut off. Its requirements page also says room tone spacing must not exceed 5 seconds.
Older versions of ACX's guidance asked for 0.5 to 1 second at the start and 1 to 5 seconds at the end. You will still see those numbers in many tutorials.
Why it happens
- The file starts the instant you speak, because the edit was cut too tight.
- There are long gaps at the start or end, over 5 seconds, left from before you started reading.
- The gaps were filled with digital silence, a flat line with no sound at all. It sounds like the audio dropped out, and it can upset noise floor readings.
How to fix it in Audacity
- Record 10 to 20 seconds of room tone at each session: sit still and record the room.
- Select a clean stretch of it and copy it with .
- Click at the start of the chapter and paste enough to reach the length you want. Do the same at the end.
- Trim anything longer than 5 seconds. can shorten long gaps across the file, but check the result by ear.
Don't use for room tone. It creates digital silence, not the sound of your room.
How to fix it in Reaper
- Cut a clean piece of room tone into its own item.
- Copy it to the start and end of the chapter, and drag the item edges to the length you want.
- Add short crossfades so the joins don't click.
- If you render with regions, make sure each region includes the room tone at both ends.
How ACX Ready fixes it
- Finds where your reading starts and stops.
- Trims or adds room tone to 1.25 seconds at the start and 2.5 seconds at the end.
- Uses the room's own background sound rather than digital silence.
- Shows the start and end tone lengths before and after in the report.
ACX Ready sets 1.25 seconds at the start and 2.5 seconds at the end, inside ACX's recommended 1 to 5 seconds at both ends. Checking is free and you see the before and after numbers first. Downloading a whole book is £30 (about $41).
Check your room tone free
See the start and end tone lengths for any chapter, along with every other ACX number. Nothing is uploaded.
Check a chapter freeFixing a whole book is £30 (about $41), with a full refund if ACX still rejects it. See what's included.
Questions
How much room tone does ACX want?
ACX's requirements page recommends 1 to 5 seconds of room tone at the beginning and end of each file, and says room tone spacing must not exceed 5 seconds.
Can I use digital silence instead of room tone?
It's best not to. Digital silence sounds like the audio cut out, while room tone sounds natural. Record room tone at each session and use that.
What is room tone?
The background sound of your recording space with nobody speaking: the same quiet hiss and air that sits behind your voice.