ACX Ready / 48 kHz sample rate

ACX rejected your file for its sample rate

"Each file must be a 192 kbps or higher CBR, 44.1kHz MP3."

ACX, ACX audio submission requirements

Sample rate is how many times per second the audio is measured. ACX takes 44.1 kHz, the CD standard. A file at 48 kHz, 96 kHz or 22.05 kHz doesn't meet the requirement, even when it sounds fine.

Why it happens

Many USB microphones, audio interfaces and video tools default to 48 kHz, the standard for video. Your editor then records the project at 48 kHz and exports at the same rate unless you change it. You can't tell by listening.

How to fix it in Audacity

  1. Set the project rate to 44100 Hz. In current versions this is under Audio Setup > Audio Settings > Project Sample Rate. Older versions show it at the bottom left of the window.
  2. If a track was recorded at 48 kHz, select it and use Tracks > Resample to convert it to 44100 Hz.
  3. Export with File > Export Audio as MP3. Check that the sample rate in the export settings is 44100 Hz.
  4. To stop it happening again, set the default sample rate to 44100 Hz in Edit > Preferences > Quality.

How to fix it in Reaper

  1. Open File > Render.
  2. Set Sample rate to 44100 before rendering. Reaper converts on render, so the project itself can stay at 48 kHz.
  3. Set the output format to MP3 at 192 kbps constant bit rate. See the MP3 bit rate guide.

Resampling changes the waveform slightly, so measure peaks again after converting. They can creep up a little.

How ACX Ready fixes it

Checking is free and you see the before and after numbers first. Downloading a whole book is £30 (about $41).

Check your file format free

Drop in a chapter to see its format and every ACX measurement. Nothing is uploaded.

Check a chapter free

Fixing a whole book is £30 (about $41), with a full refund if ACX still rejects it. See what's included.

Questions

What sample rate does ACX require?

ACX requires MP3 files at 44.1 kHz.

Can I record at 48 kHz?

Yes, as long as the files you upload are converted to 44.1 kHz. Many narrators record at 48 kHz and convert on export.

Does converting from 48 kHz to 44.1 kHz lose quality?

Not in a way listeners will notice for spoken word. Do measure the peaks again afterwards, since resampling can raise them slightly.

Other ACX rejection reasons